Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Swim distance or slow speed, for example for snow plows or TUR front loaders. Causes the piston rod to move freely in hydraulic cylinders. Protects elements that are in direct contact with the ground, e.
Recommended system oil flow: 0 - 80 l / min. Control example: a double-acting cylinder. Can be connected in series to an existing system (pressure sleeve required).
Position 0 neutral (lever in vertical position) cylinder piston rod is stationary - oil overflows. Working position 1 (lever in forward position) The cylinder piston extends.
The 2nd working position (lever to the rear) of the cylinder piston rod moves in. Float position 3 With the latch (lever in maximum forward position) the cylinder piston rod works loosely, extends and retracts freely under the influence of force. Lots of ways to place the lever, see photos.
Return to the tank (T): BSPP 3/4 female thread. Outlet for section (A, B): BSPP 1/2 female thread.Series connection (N): BSPP 3/4 female thread. Maximum inlet pressure: 250Bar Maximum return pressure: 50Bar Maximum pressure on sections: 300Bar. Factory-set overflow valve to 175 bar Self-adjusting, full turn, change by 30 bar. Permissible ambient temperature: -40 ° C to +60 ° C Permissible oil temperature: -15 ° C to +80 ° C. Dimensions can be changed slightly.